The Scan Foam Latex Coated Gloves are comfortable, flexible protective work gloves designed to provide excellent grip during general handling, construction, maintenance and DIY tasks.

Manufactured with a seamless knitted polyester liner, these high-visibility work gloves offer a comfortable fit while allowing natural hand movement.

The palms and fingers feature a durable black latex wrinkle-finish coating, designed to provide reliable grip and flexibility in both wet and dry working conditions.

Their high-visibility design helps make the gloves more noticeable in busy working environments, while the flexible construction makes them practical for handling tools, equipment and materials.

With a stated mechanical protection rating of 2-1-2-1, the Scan Foam Latex Coated Gloves provide basic protection against abrasion, blade cuts, tearing and puncture under standardised test conditions.

Whether you're working on a construction site, carrying out general maintenance or tackling home improvement projects, these Scan Latex Grip Work Gloves combine comfort, visibility and practical hand protection.

Key Benefits

• Scan foam latex coated work gloves

• High-visibility design

• Seamless knitted polyester construction

• Comfortable and flexible fit

• Black latex wrinkle-finish coating

• Latex coating on palms and fingers

• Excellent grip in wet and dry conditions

• Suitable for general handling tasks

• Flexible construction for improved dexterity

• Abrasion resistance rated Level 2 out of 4

• Blade cut resistance rated Level 1 out of 5

• Tear resistance rated Level 2 out of 4

• Puncture resistance rated Level 1 out of 4

• Mechanical protection rating of 2-1-2-1

• Practical for construction, maintenance and DIY work

Black Latex Wrinkle-Finish Coating

The Scan Foam Latex Coated Gloves feature a distinctive black latex wrinkle-finish coating across the palms and fingers.

The textured coating is designed to provide a secure gripping surface when handling tools, equipment and materials.

Its wrinkle-finish texture helps improve contact with surfaces, making the gloves useful for suitable tasks involving wet or dry materials.

The coating also provides an additional layer of protection over the areas most frequently used for gripping.

Important: Grip performance depends on the surface, contamination and working conditions. No glove can guarantee a secure grip in every situation.

Excellent Wet & Dry Grip

One of the main advantages of these Scan Latex Grip Gloves is their ability to provide practical grip in both wet and dry conditions.

The textured latex coating helps users maintain control when handling a variety of everyday materials.

Potential applications include:

• Handling building materials

• General construction work

• Gardening and outdoor maintenance

• Workshop tasks

• Carrying tools and equipment

• Property maintenance

• General DIY activities

The gloves are particularly useful where flexibility and grip are more important than heavy-duty mechanical protection.

Important: The latex coating does not make the entire glove waterproof or suitable for chemical immersion.

Seamless Knitted Polyester Liner

The gloves are manufactured using a knitted seamless polyester liner.

This construction is designed to provide comfort while reducing the irritation that can sometimes result from internal seams.

The flexible knitted material allows the gloves to follow natural hand movement.

This makes them a practical choice for tasks involving frequent gripping, lifting and handling.

The polyester liner also helps keep the gloves relatively lightweight compared with traditional heavy-duty leather work gloves.

High-Visibility Design

The Scan Foam Latex Coated Work Gloves feature a high-visibility design intended to make the gloves more noticeable during use.

This can be useful in busy working environments where hand movements need to be easily seen.

The contrasting black latex coating also gives the gloves a distinctive appearance.

Important: High-visibility colouring does not establish certification to a high-visibility clothing standard. No separate visibility certification has been supplied.

Flexible Construction for Everyday Comfort

Comfort is important when choosing protective gloves for repetitive handling tasks.

The Scan Foam Latex Coated Gloves combine a flexible polyester liner with a textured latex coating designed to maintain practical hand movement.

This makes them useful for suitable work requiring:

• Gripping tools

• Carrying materials

• Handling equipment

• General assembly

• Light maintenance

• Routine manual tasks

The correct glove size is essential for comfort, dexterity and safe handling.

Mechanical Protection Rating – 2-1-2-1

The supplied mechanical protection ratings for the Scan Foam Latex Coated Gloves are 2-1-2-1.

These follow the traditional four-digit EN388 performance format.

Abrasion Resistance – Level 2

The gloves have a stated Level 2 abrasion resistance rating.

This indicates a defined level of resistance to surface wear under the relevant test conditions.

It makes them suitable for appropriately assessed general handling tasks involving moderate surface friction.

Blade Cut Resistance – Level 1

The gloves have a stated Level 1 blade cut resistance rating.

This is a relatively low level of cut protection.

The gloves should not be relied upon for handling sharp blades, sheet metal with dangerous edges or other significant cutting hazards.

Tear Resistance – Level 2

The gloves achieve a stated Level 2 tear resistance rating.

This indicates resistance to tearing under the applicable standardised test conditions.

Puncture Resistance – Level 1

The gloves have a stated Level 1 puncture resistance rating.

This provides limited puncture protection and is not suitable for tasks involving significant puncture hazards.

Important: The 2-1-2-1 rating does not mean the gloves are cut-proof or puncture-proof. The exact EN388 standard edition and any additional cut-test markings have not been supplied.

Suitable for Construction, Gardening & DIY

The Scan High-Visibility Latex Coated Gloves are designed for a range of general-purpose handling applications.

Typical uses include:

• Construction site maintenance

• General building work

• Gardening and landscaping

• Outdoor property maintenance

• Workshop handling

• Warehouse tasks

• Home improvements

• General DIY projects

• Handling tools and equipment

• Light industrial work

Their textured latex palms make them particularly useful where grip is required in changing working conditions.

For tasks involving significant cuts, punctures, chemicals, electricity or extreme temperatures, use gloves specifically certified for those hazards.

Latex Allergy Considerations

These gloves contain a latex coating.

Natural rubber latex may cause allergic reactions in sensitive individuals.

Users with known or suspected latex allergies should choose suitable latex-free gloves.

The supplied information does not establish chemical resistance, electrical insulation or thermal protection.

Care & Maintenance

To help maintain the condition of the Scan Foam Latex Coated Gloves:

1. Inspect the gloves before each use.

2. Check the latex coating for cracks, splits and excessive wear.

3. Examine the polyester liner for holes or damage.

4. Remove loose dirt after use.

5. Follow the manufacturer's cleaning instructions.

6. Allow damp gloves to dry naturally, away from direct heat.

7. Avoid contact with substances that may degrade latex.

8. Replace gloves that are damaged or no longer provide adequate grip.

Important: Do not wear gloves near rotating machinery where they could become entangled.

Why Choose Scan Foam Latex Coated Gloves?

The Scan Foam Latex Coated Gloves combine comfort, flexibility and dependable grip in a practical high-visibility design.

Their seamless knitted polyester liner provides comfortable wear, while the black latex wrinkle-finish coating offers effective grip in suitable wet and dry conditions.

The flexible construction makes them useful for general handling tasks, and the stated 2-1-2-1 mechanical protection rating provides basic protection against abrasion, blade cuts, tearing and puncture.

For construction workers, gardeners, maintenance professionals and DIY enthusiasts looking for comfortable latex-coated work gloves with textured grip, the Scan Foam Latex Coated Gloves are a practical everyday choice.

Product Information

Brand: Scan
Product: Foam Latex Coated Gloves
Type: High-Visibility Protective Work Gloves
Liner Material: Polyester
Liner Construction: Seamless Knitted
Coating Material: Latex
Coating Colour: Black
Coating Finish: Wrinkle Finish
Coating Coverage: Palms and Fingers
Grip Properties: Designed for Wet and Dry Conditions
Design: High Visibility
Primary Features: Grip, Flexibility and Comfort
Mechanical Protection Rating: 2-1-2-1
Abrasion Resistance: Level 2/4
Blade Cut Resistance: Level 1/5
Tear Resistance: Level 2/4
Puncture Resistance: Level 1/4
Suitable Applications: Construction, Gardening, General Handling, Maintenance and DIY
Latex Content: Yes
Available Sizes: Not Specified
Liner Colour: Not Specified
EN388 Standard Edition: Not Specified

Please note: The supplied mechanical ratings follow the traditional EN388 four-digit format, but the exact standard edition has not been confirmed. These gloves contain latex and provide only limited cut and puncture protection.

Data Sheet

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns