The Scan Grey Polyurethane Coated Cut 5 Liner Gloves are lightweight, high-performance protective work gloves designed to combine excellent cut resistance with grip, flexibility and comfort.

Featuring a polyurethane (PU) coating on the palms and fingers, these gloves provide a secure grip for suitable handling tasks while retaining the flexibility needed for precise work.

Their seamless knitted liner offers a comfortable fit and helps maintain dexterity during everyday industrial activities.

Weighing just 13g per glove, the Scan Cut 5 Gloves are designed to minimise bulk without compromising their stated mechanical protection performance.

The gloves are specified as conforming to EN420 and EN388, with a traditional EN388 performance rating of 4-5-4-3.

This includes Level 5 blade cut resistance, Level 4 abrasion resistance, Level 4 tear resistance and Level 3 puncture resistance.

For workers requiring lightweight cut-resistant gloves with a flexible PU-coated grip, the Scan Grey Cut 5 Liner Gloves offer practical protection for appropriately assessed industrial and general handling applications.

Key Benefits

• Scan Grey Polyurethane Coated Cut 5 Liner Gloves

• High blade cut resistance – Level 5 out of 5

• Excellent abrasion resistance – Level 4 out of 4

• High tear resistance – Level 4 out of 4

• Good puncture resistance – Level 3 out of 4

• Traditional EN388 mechanical performance rating of 4543

• Polyurethane-coated palms and fingers

• Excellent grip for suitable handling tasks

• Flexible construction for improved dexterity

• Seamless knitted liner for comfort

• Lightweight design weighing only 13g per glove

• Suitable for appropriately assessed precision handling and industrial tasks

• Stated conformity to EN420 and EN388

High Cut Resistance – Level 5

The Scan Cut 5 Safety Gloves are designed for work where protection against blade-cut hazards is important.

Their stated Level 5 blade cut resistance is the highest level on the traditional EN388 circular blade cut test scale.

This makes them a potential choice for tasks involving materials with sharp or abrasive edges, where a suitable risk assessment confirms that their protection is adequate.

Potential applications include:

• Handling certain sheet materials

• General metal component handling

• Industrial assembly

• Warehouse and manufacturing tasks

• Maintenance work involving sharp-edged materials

• Suitable glass or panel handling

Important: Cut Level 5 does not mean the gloves are cut-proof. The stated rating uses the traditional EN388 blade cut scale and does not establish an EN388:2016 ISO 13997 cut resistance letter grade.

For high-risk cutting tasks, confirm the glove's current certification and suitability for the specific hazard.

Polyurethane-Coated Palms & Fingers

The gloves feature a polyurethane coating across the palms and fingers.

PU coatings are widely used in work gloves because they can provide grip while allowing the glove to remain flexible.

This helps users handle suitable tools, components and materials with greater control.

Benefits of the PU Coating

• Excellent grip for suitable handling tasks

• Flexible feel

• Supports dexterity

• Useful for precise handling

• Protective coating on key contact areas

The coating is applied to the palms and fingers rather than the entire glove.

Important: The PU coating should not be assumed to provide chemical, oil-immersion or liquid-barrier protection.

Seamless Knitted Liner

The Scan Grey PU-Coated Gloves feature a seamless knitted liner designed to improve comfort during use.

The absence of internal seams can help reduce pressure points and rubbing.

The knitted construction also supports flexibility and hand movement.

This makes the gloves practical for tasks requiring a combination of protection and dexterity.

Seamless Liner Benefits

• Comfortable fit

• Reduced irritation from internal seams

• Flexible construction

• Supports natural hand movement

• Practical for repetitive handling tasks

The specific liner fibre composition has not been supplied.

Ultra-Lightweight – Just 13g Per Glove

A standout feature of the Scan Cut 5 Liner Gloves is their exceptionally lightweight construction.

Each glove weighs approximately 13g.

This helps reduce bulk and makes the gloves practical for work requiring frequent hand movement.

The lightweight design is particularly beneficial for:

• Precision assembly

• Component handling

• General workshop tasks

• Repetitive industrial work

• Suitable maintenance activities

Comfort and dexterity also depend on choosing the correct glove size.

Excellent Grip & Flexibility

The Scan Grey PU-Coated Cut 5 Gloves are designed to offer a balance of mechanical protection, grip and flexibility.

The polyurethane-coated palms and fingers help users maintain control of suitable materials.

Meanwhile, the knitted liner allows the gloves to flex with hand movement.

This combination makes them useful for tasks where bulky gloves could make handling more difficult.

Grip performance may vary depending on surface conditions, including the presence of oil, grease or moisture.

EN388 Mechanical Protection – Rating 4543

The Scan Grey Cut 5 Safety Gloves have a stated traditional EN388 mechanical performance rating of 4-5-4-3.

Abrasion Resistance – Level 4

The gloves achieve Level 4 abrasion resistance, the highest level on the stated scale.

This indicates excellent resistance to surface wear under standardised test conditions.

It is a useful feature for handling abrasive materials and carrying out repetitive industrial tasks.

Blade Cut Resistance – Level 5

The gloves achieve Level 5 blade cut resistance on the traditional EN388 circular blade test.

This indicates high performance under that test method.

However, it does not establish protection against every blade type or cutting force.

Tear Resistance – Level 4

The gloves achieve Level 4 tear resistance, the highest level on the stated scale.

This demonstrates strong resistance to tearing under the relevant standardised test conditions.

Puncture Resistance – Level 3

The gloves achieve Level 3 puncture resistance out of a possible 4.

This provides a useful level of resistance to the test probe used in the standard.

Important: EN388 puncture ratings do not establish protection against hypodermic needles or other fine sharp objects.

EN420 General Protective Glove Requirements

The Scan Grey PU-Coated Cut 5 Gloves are also specified as conforming to EN420.

EN420 covered general requirements for protective gloves, including design, sizing, comfort and manufacturer information.

The standard has since been superseded by EN ISO 21420.

The supplied product information does not confirm conformity to the newer standard.

For current workplace compliance, consult the manufacturer's latest declaration of conformity and glove markings.

Suitable Applications

The Scan Cut 5 PU-Coated Gloves may be suitable for a range of industrial and general handling tasks, including:

• Manufacturing and assembly

• Handling suitable sharp-edged components

• General engineering work

• Warehouse operations

• Industrial maintenance

• Handling certain metal parts

• Workshop activities

• Precision material handling

• General construction handling

The gloves are particularly useful where a combination of cut resistance, grip, flexibility and lightweight comfort is required.

Always select gloves according to the specific risks identified in the workplace assessment.

Safety Considerations

Before using the Scan Grey Cut 5 Gloves, consider the following:

• They are cut-resistant, not cut-proof.

• The traditional Level 5 blade cut score is not equivalent to a modern ISO cut letter grade.

• They are not needle-proof.

• The gloves are not specified as chemical-resistant.

• They are not certified for electrical work.

• No heat or flame protection rating has been supplied.

• Gloves may create entanglement hazards around rotating machinery.

Do not use these gloves where the task requires protection beyond their verified performance ratings.

Care & Maintenance

To maintain the condition of the gloves:

1. Inspect the PU coating before each use.

2. Check the knitted liner for cuts, holes or tears.

3. Remove surface contamination according to the manufacturer's instructions.

4. Avoid unsuitable cleaning agents that may damage the coating.

5. Allow gloves to dry naturally.

6. Store in a clean, dry location.

7. Replace gloves showing significant wear or damage.

The gloves should also be replaced if their protective performance may have been compromised.

Why Choose Scan Grey PU-Coated Cut 5 Gloves?

The Scan Grey Polyurethane Coated Cut 5 Liner Gloves offer an excellent combination of high mechanical protection, grip and lightweight comfort.

Their EN388 4543 performance rating demonstrates strong resistance to abrasion, blade cuts and tearing, alongside useful puncture resistance.

The PU-coated palms and fingers provide grip and flexibility, while the seamless knitted liner supports comfortable wear.

At only 13g per glove, they are particularly practical for tasks requiring frequent hand movement and precise handling.

For workers looking for lightweight cut-resistant safety gloves with high abrasion resistance and a flexible PU grip, the Scan Grey Cut 5 Gloves are a practical choice for suitably assessed work.

Product Information

Brand: Scan
Product: Grey Polyurethane Coated Cut 5 Liner Gloves
Type: Cut-Resistant Protective Work Gloves
Colour: Grey
Coating Material: Polyurethane (PU)
Coating Coverage: Palms and Fingers
Liner Construction: Seamless Knitted
Liner Material: Not Specified
Weight: 13g per Glove
Grip: Excellent
Flexibility: High
Stated Standards: EN420 and EN388
Traditional EN388 Rating: 4-5-4-3
Abrasion Resistance: Level 4/4
Blade Cut Resistance: Level 5/5
Tear Resistance: Level 4/4
Puncture Resistance: Level 3/4
EN ISO 13997 Cut Letter Grade: Not Specified
Suitable Applications: Industrial Handling, Assembly, Maintenance and Suitable Sharp-Edged Material Handling
Available Sizes: Not Specified
Chemical Protection Certification: Not Specified

Please note: The supplied EN388 4543 rating follows the traditional four-digit performance format. Current EN388 classifications may include additional cut-resistance and impact-protection markings. EN420 has been superseded by EN ISO 21420. Check the manufacturer's current certification before selecting gloves for high-risk cutting tasks.

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns

• excellent cut-resistant gloves, perfect for gardening, diy, construction and digging in trashy areas like when metal detecting

  5/5

  Written by: Glen

  Date: 23/01/2018

• First class product, exactly as advertised.

  5/5

  Written by: Nevin

  Date: 26/10/2017