The Scan PVC Knitwrist Gloves are practical, hardwearing protective work gloves designed to help protect hands when handling materials exposed to oil, grease, dirt and certain household chemicals.

Featuring a fully coated red PVC exterior over a cotton glove, these safety gloves provide a protective barrier while offering resistance to abrasion and tearing during suitable general handling tasks.

The knitted wrist cuffs help provide a secure, comfortable fit and reduce the entry of dust and loose debris into the gloves.

Designed for everyday workplace and household applications, the Scan PVC Knitwrist Gloves are suitable for tasks involving general maintenance, workshop activities, cleaning and material handling, provided the hazards have been appropriately assessed.

The gloves are specified as conforming to EN420 and EN388, with a mechanical protection rating of 2-1-2-1 for abrasion, blade cut, tear and puncture resistance.

Whether you're working in a garage, handling greasy components or carrying out routine maintenance, the Scan Red PVC Knitwrist Gloves offer practical hand protection for compatible tasks.

Key Benefits

• Scan PVC Knitwrist protective gloves

• Fully coated red PVC exterior

• Cotton glove construction

• Designed to protect against oil and grease

• Protection against certain household chemicals, subject to compatibility

• Abrasion-resistant coating

• Tear-resistant construction

• Knitted wrist cuffs

• Helps reduce dust and debris entering the gloves

• Practical for general handling and maintenance

• Suitable for workshop and garage tasks

• Stated conformity to EN420 and EN388

• EN388 mechanical protection rating: 2-1-2-1

• Useful for domestic and professional applications

Fully Coated Red PVC Protection

The Scan PVC Knitwrist Gloves feature a fully coated red PVC exterior designed to provide a protective barrier during suitable handling tasks.

PVC-coated gloves are commonly used when working with oily or greasy materials because the coating helps prevent direct contact between the skin and the substances being handled.

The coating also provides resistance to everyday wear associated with suitable general handling activities.

These gloves are a practical option for tasks where ordinary fabric gloves may not provide sufficient protection against surface contamination.

Protection Against Oil & Grease

The Scan Red PVC Gloves are designed to help protect hands when handling materials contaminated with oil and grease.

Potential applications include:

• General workshop maintenance

• Handling oily components

• Garage work

• Equipment cleaning

• General machinery maintenance

• Handling greasy tools

• Routine household maintenance

The gloves should be selected according to the substances being handled and the level of protection required.

Important: Oil and grease resistance does not mean the gloves are suitable for every solvent, fuel, lubricant or chemical.

Protection Against Certain Household Chemicals

The PVC coating is described as providing protection against most household chemicals.

However, chemical resistance varies depending on the exact substance, its concentration, temperature and contact duration.

The supplied EN420 and EN388 standards do not establish chemical protective performance.

For tasks involving chemicals, consult the manufacturer's chemical compatibility information and check whether the gloves have appropriate chemical protective certification, such as EN ISO 374, for the specific substance.

Do not use these gloves for hazardous chemical handling without confirming their suitability.

Knitted Wrist Cuffs

The Scan PVC Knitwrist Gloves feature knitted wristbands designed to help keep the gloves comfortably positioned during use.

The cuffs also help reduce the entry of dust and loose debris through the wrist opening.

This makes them particularly practical for dusty workshops, maintenance areas and general material handling.

The knitted cuffs are not liquid-tight and should not be relied upon to prevent chemical or liquid ingress.

Cotton Glove Construction

The gloves feature a cotton base with a PVC coating.

The cotton construction provides a fabric layer beneath the protective exterior.

Combined with the knitted wrist design, this creates a practical glove for regular handling and maintenance tasks.

Abrasion & Tear Resistance

The Scan PVC Knitwrist Gloves offer mechanical protection against common handling hazards.

Their EN388 rating of 2-1-2-1 identifies tested performance in four categories:

• Abrasion resistance

• Blade cut resistance

• Tear resistance

• Puncture resistance

This makes them useful for suitable general-purpose work where minor mechanical hazards are present.

The gloves are not intended to replace specialist cut-resistant, puncture-resistant or other task-specific protective gloves when higher levels of protection are required.

EN388 Mechanical Protection Rating

The supplied EN388 performance rating is 2-1-2-1.

Abrasion Resistance – Level 2

The gloves achieve a stated Level 2 abrasion resistance rating.

This indicates a tested degree of resistance to surface wear during mechanical contact.

Blade Cut Resistance – Level 1

The gloves have a stated Level 1 blade cut resistance rating.

This represents limited cut resistance and should not be considered suitable protection for tasks involving significant sharp-blade hazards.

Tear Resistance – Level 2

The gloves achieve a stated Level 2 tear resistance rating.

This indicates resistance to tearing under the relevant test conditions.

Puncture Resistance – Level 1

The gloves have a stated Level 1 puncture resistance rating.

This provides limited resistance under the relevant puncture test and does not mean the gloves are needle-resistant.

Important: These ratings reflect the supplied four-digit EN388 classification. More recent versions of EN388 include additional cut-testing and optional impact protection information. Check the product's current markings and declaration of conformity for the applicable standard edition.

EN420 General Protective Glove Standard

The Scan PVC Knitwrist Gloves are also specified as conforming to EN420, the former European standard covering general requirements for protective gloves.

EN420 has since been superseded by EN ISO 21420.

The supplied EN420 conformity should not automatically be interpreted as certification to the newer standard.

Check the current product label and manufacturer documentation where up-to-date PPE certification is required.

Ideal for General Maintenance & Handling

The Scan PVC Coated Work Gloves are suitable for a range of general-purpose applications, subject to the workplace risk assessment.

Typical uses include:

• Garage maintenance

• General workshop tasks

• Handling greasy materials

• Equipment maintenance

• Routine cleaning

• General industrial handling

• Household maintenance

• Handling dusty materials

• Suitable light-duty work

For tasks involving sharp edges, aggressive chemicals, heat, electricity or other specialist hazards, use gloves specifically certified for the relevant risk.

Glove Care & Inspection

To help maintain the performance of the Scan PVC Knitwrist Gloves:

1. Inspect the gloves before each use.

2. Check the PVC coating for cracks, holes or excessive wear.

3. Examine the knitted cuffs for damage.

4. Ensure the gloves are clean and dry inside before use.

5. Avoid contact with substances not confirmed as compatible with the glove material.

6. Replace the gloves if the protective coating is damaged or compromised.

7. Follow the manufacturer's cleaning and storage instructions.

Important: Gloves that are torn, punctured or chemically degraded may no longer provide the intended protection.

Why Choose Scan PVC Knitwrist Gloves?

The Scan PVC Knitwrist Gloves combine a practical fully coated design with useful mechanical protection for everyday handling tasks.

The red PVC exterior provides a barrier against oil, grease and compatible substances, while the cotton glove construction offers a practical base for regular wear.

The knitted wrist cuffs help reduce dust infiltration, making the gloves suitable for workshops, garages and maintenance environments.

With a stated EN388 2-1-2-1 mechanical protection rating, these gloves provide a clearly defined level of abrasion, blade cut, tear and puncture resistance for suitable general-purpose work.

Product Information

Brand: Scan
Product: PVC Knitwrist Gloves
Type: PVC Coated Protective Work Gloves
Colour: Red
Coating Material: PVC (Polyvinyl Chloride)
Glove Material: Cotton
Coating Coverage: Fully Coated
Wrist Style: Knitted Wrist Cuff
Primary Protection: Oil, Grease and Compatible Household Substances
Mechanical Protection: Abrasion and Tear Resistance
Stated Standards: EN420 and EN388
EN388 Rating: 2-1-2-1
Abrasion Resistance: Level 2
Blade Cut Resistance: Level 1
Tear Resistance: Level 2
Puncture Resistance: Level 1
Suitable Applications: General Handling, Maintenance, Workshop and Garage Tasks
Available Sizes: Not Specified

Please note: Glove size, coating thickness, chemical compatibility data and certification to current standards have not been supplied. Confirm suitability for the intended task before use.

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns