The Scan PVC Gauntlet Gloves are durable, fully coated protective work gloves designed to provide practical hand and wrist protection during general industrial, maintenance and cleaning tasks.

Featuring a red PVC coating and a comfortable cotton knitted liner, these gauntlets combine a protective outer surface with a softer interior for everyday wear.

The PVC coating offers resistance to oil and grease and may provide protection against certain household chemicals, subject to the substance involved, exposure conditions and manufacturer's compatibility guidance.

The textured palm and finger surfaces are designed to provide excellent grip, helping users handle tools, equipment and materials more securely during suitable work activities.

With a stated EN388 mechanical protection rating of 3-1-1-1, these Scan PVC Gauntlets offer Level 3 abrasion resistance alongside basic protection against blade cuts, tearing and puncture.

The gloves are also specified as conforming to EN420, the former European standard covering general requirements for protective gloves.

For workers looking for PVC-coated gauntlet gloves with an extended wrist-covering design, the Scan PVC Gauntlets offer a practical solution for appropriately assessed handling and maintenance applications.

Key Benefits

• Scan PVC gauntlet protective gloves

• Fully coated red PVC outer

• Comfortable cotton knitted liner

• Gauntlet design for hand and wrist coverage

• Resistance to oil and grease

• May be suitable for certain household chemicals

• Grippy palm and finger surfaces

• Good abrasion resistance

• Practical for general handling and maintenance

• Stated conformity to EN388 and EN420

• EN388 mechanical protection rating of 3-1-1-1

• Abrasion resistance Level 3 out of 4

• Blade cut resistance Level 1 out of 5

• Tear resistance Level 1 out of 4

• Puncture resistance Level 1 out of 4

Fully Coated Red PVC Construction

The Scan PVC Gauntlet Gloves feature a fully coated red polyvinyl chloride (PVC) exterior.

PVC is commonly used in protective work gloves because it can provide a durable barrier against certain contaminants and help resist wear during handling tasks.

The full coating extends across the glove's outer surface, providing additional coverage compared with palm-only coated gloves.

This makes the gauntlets a practical option for suitable tasks involving oily or greasy materials.

Important: A fully coated glove is not automatically certified as liquid-tight or resistant to all chemicals. Suitability depends on the specific substance, exposure duration and glove construction.

Comfortable Cotton Knitted Liner

Inside the PVC coating, the gloves feature a cotton knitted liner.

The liner provides a comfortable layer between the hand and the outer PVC material.

Its knitted construction helps improve everyday wearing comfort during suitable handling tasks.

Benefits of the Cotton Liner

• Comfortable inner surface

• Separates the hand from the PVC coating

• Practical for routine work activities

• Supports comfortable wear during general handling

The correct glove size is important for maintaining comfort and grip.

Protection Against Oil & Grease

The Scan Red PVC Gauntlets are designed to provide resistance to oil and grease.

This makes them useful for certain tasks involving oily components, greasy equipment and general maintenance materials.

Potential applications include:

• Handling greasy components

• Routine machinery maintenance

• General workshop cleaning

• Handling oily tools and equipment

• Suitable industrial housekeeping

Important: Oil and grease resistance does not establish suitability for prolonged immersion in fuels, solvents or other hazardous chemicals.

Resistance to Certain Household Chemicals

The supplied product information describes the Scan PVC Gauntlets as providing protection against most household chemicals.

However, chemical resistance varies significantly between substances.

Factors affecting suitability include:

• Chemical identity

• Concentration

• Contact duration

• Temperature

• Condition of the glove

• Manufacturer-tested permeation and degradation performance

No specific EN ISO 374 chemical protection certification or chemical compatibility data has been supplied.

For this reason, the gloves should only be used with household chemicals where compatibility has been confirmed.

Do not assume they are suitable for strong acids, concentrated alkalis, solvents or other hazardous substances.

Excellent Grip on Palms & Fingers

The Scan PVC-Coated Work Gloves feature palm and finger surfaces designed to provide excellent grip.

This helps users maintain control when handling suitable tools, materials and equipment.

The grippy surface is particularly useful during general industrial and maintenance work.

Grip performance will vary depending on the material being handled and whether the surface is wet, oily or contaminated.

Gauntlet Design for Hand & Wrist Protection

Unlike short-cuff work gloves, the Scan PVC Gauntlets feature an extended gauntlet-style construction.

This provides additional coverage around the wrist.

The design can be useful for suitable handling tasks where wrist coverage is desirable.

Important: The exact gauntlet length has not been supplied. Extended coverage does not automatically establish chemical splash protection or suitability for immersion.

EN388 Mechanical Protection – Rating 3111

The Scan PVC Gauntlets have a stated EN388 mechanical protection rating of 3-1-1-1.

These four digits correspond to the traditional EN388 performance categories.

Abrasion Resistance – Level 3

The gloves achieve Level 3 abrasion resistance.

This indicates good resistance to surface wear under the relevant standardised test conditions.

It is a useful feature for routine handling tasks involving repeated contact with materials and equipment.

Blade Cut Resistance – Level 1

The gloves have Level 1 blade cut resistance.

This is a low level of cut protection.

They should not be relied upon for handling sharp blades, hazardous sheet-metal edges or other significant cutting risks.

Tear Resistance – Level 1

The gloves achieve Level 1 tear resistance.

This indicates basic resistance to tearing under the relevant test conditions.

Puncture Resistance – Level 1

The gloves have Level 1 puncture resistance.

They are not puncture-proof and should not be used where substantial puncture hazards are present.

Important: The 3111 rating does not establish protection against needles or other fine sharp objects. The exact EN388 edition and any additional cut-test markings have not been supplied.

EN420 General Protective Glove Requirements

The Scan PVC Gauntlets are also specified as conforming to EN420.

EN420 was the European standard covering general requirements for protective gloves, including relevant aspects of design, comfort, sizing and manufacturer information.

It has since been superseded by EN ISO 21420.

The supplied information does not confirm certification to the newer standard.

For current workplace requirements, check the manufacturer's latest declaration of conformity and glove markings.

Suitable Applications

The Scan PVC Gauntlet Gloves may be suitable for a variety of appropriately assessed tasks, including:

• General industrial handling

• Workshop maintenance

• Handling greasy equipment

• Routine cleaning

• Suitable household maintenance

• General industrial housekeeping

• Handling non-sharp materials

• Selected tasks involving compatible household cleaning products

The gloves are particularly practical where abrasion resistance, grip and extended wrist coverage are useful.

For tasks involving significant chemical, cut, puncture, heat or electrical hazards, choose gloves specifically certified for those risks.

Safety Considerations

Before using the Scan PVC Gauntlets:

• Check that the gloves are suitable for the task.

• Confirm chemical compatibility where relevant.

• Inspect the PVC coating for cracks, holes or damage.

• Avoid handling sharp objects beyond the gloves' protection rating.

• Do not use them for electrical work without appropriate certification.

• Do not assume heat or flame resistance.

• Keep gloves away from rotating machinery where entanglement could occur.

Replace damaged gloves immediately.

Care & Maintenance

To help maintain the condition of the Scan PVC Gauntlets:

1. Inspect the gloves before each use.

2. Check the PVC coating for cuts, cracks and signs of deterioration.

3. Remove surface contamination using methods approved by the manufacturer.

4. Allow the gloves to dry naturally.

5. Avoid direct heat and prolonged sunlight during storage.

6. Store in a clean, dry location.

7. Replace gloves that have become damaged, degraded or contaminated beyond safe cleaning.

Do not reuse gloves following hazardous chemical exposure unless the manufacturer confirms that cleaning and reuse are safe.

Why Choose Scan PVC Gauntlet Gloves?

The Scan PVC Gauntlet Gloves combine a durable red PVC coating with a comfortable cotton knitted liner and practical wrist-covering design.

Their Level 3 abrasion resistance makes them useful for general handling tasks, while the grippy palm and finger surfaces help improve control when working with suitable materials.

The fully coated construction offers resistance to oil and grease and may provide protection against selected household chemicals where compatibility has been verified.

With a stated EN388 3111 mechanical protection rating, these gloves offer a practical choice for maintenance workers, workshop personnel and other users requiring everyday hand and wrist protection.

For anyone looking for red PVC-coated gauntlet gloves with good abrasion resistance and grip, the Scan PVC Gauntlets are a dependable option for appropriately assessed work.

Product Information

Brand: Scan
Product: PVC Gauntlet Gloves
Type: Protective Work Gauntlets
Outer Material: PVC
Outer Colour: Red
Coating Coverage: Fully Coated
Inner Liner: Cotton Knitted
Cuff Style: Gauntlet
Protection Coverage: Hands and Wrists
Grip: Grippy Palm and Finger Surfaces
Oil Resistance: Stated
Grease Resistance: Stated
Household Chemical Resistance: Subject to Compatibility Verification
Stated Standards: EN420 and EN388
EN388 Mechanical Rating: 3-1-1-1
Abrasion Resistance: Level 3/4
Blade Cut Resistance: Level 1/5
Tear Resistance: Level 1/4
Puncture Resistance: Level 1/4
Suitable Applications: General Handling, Maintenance, Workshop Tasks and Suitable Cleaning Work
EN ISO 374 Chemical Certification: Not Specified
Available Sizes: Not Specified
Gauntlet Length: Not Specified

Please note: EN420 has been superseded by EN ISO 21420. No specific chemical protection certification has been supplied. The gloves offer limited blade cut, tear and puncture resistance and should be selected according to the hazards of the task.

Data Sheet

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns