The Scan Rigger Gloves are hardwearing, general-purpose protective work gloves designed for a wide range of DIY, workshop, construction and material-handling tasks.

Manufactured using cow split leather and a striped cotton fabric back, these traditional rigger gloves combine practical comfort with reinforced protection in areas subject to everyday wear.

The gloves feature a patched leather palm, reinforced finger sections and a protective knuckle strap, helping provide durability during suitable general handling activities.

Their pasted cuffs complete the traditional rigger glove design, making them a practical addition to a builder's toolbox, workshop or home DIY kit.

Designed for general-purpose use, the Scan Leather Rigger Gloves are suitable for tasks such as moving materials, handling timber, gardening and carrying out routine maintenance, provided the gloves are appropriate for the hazards involved.

The gloves are specified as conforming to EN420 and EN388, with a mechanical protection rating of 2-2-2-2 for abrasion, blade cut, tear and puncture resistance.

Whether you're working on a home improvement project, carrying materials or completing everyday workshop tasks, the Scan Rigger Gloves provide a practical combination of leather protection, reinforced construction and traditional workwear styling.

Key Benefits

• Scan general-purpose rigger gloves

• Hardwearing cow split leather construction

• Patched leather palm for additional protection

• Striped cotton fabric back

• Reinforced finger sections

• Protective knuckle strap

• Traditional pasted cuffs

• Designed for general DIY and handling tasks

• Suitable for workshop and maintenance applications

• Practical for building and construction work

• Reinforced areas for improved durability

• Stated conformity to EN420 and EN388

• EN388 mechanical protection rating of 2-2-2-2

• Useful for domestic and professional applications

Hardwearing Cow Split Leather Construction

The Scan Rigger Gloves feature cow split leather, a material commonly used in general-purpose work gloves.

Split leather provides a practical protective surface for suitable manual handling tasks and is valued for its resistance to everyday wear.

This makes the gloves useful for working with materials that may cause abrasion during routine handling.

The leather construction is particularly suitable for general building, workshop and DIY applications where hand protection is required.

Reinforced Patched Leather Palm

The gloves feature a patched leather palm, providing an additional layer of material in a high-contact area.

The palm is frequently exposed to friction when gripping tools, carrying materials or moving equipment.

The reinforced construction helps improve durability during suitable general handling tasks.

This makes the Scan Rigger Gloves a practical choice for activities involving repeated gripping and handling.

Reinforced Fingers & Knuckle Strap

The Scan Leather Rigger Gloves incorporate reinforced sections on the fingers and a protective knuckle strap.

These features provide additional material in areas that commonly experience contact and wear.

The reinforced design is particularly useful for routine manual work involving tools, timber and building materials.

Important: Reinforced knuckle sections should not be confused with certified impact protection. No specific impact protection rating has been supplied.

Striped Cotton Fabric Back

The gloves feature a striped cotton back, combining traditional rigger glove styling with a fabric construction.

The cotton back provides a practical alternative to an entirely leather glove.

Combined with the leather palm and reinforced sections, it creates a versatile design for everyday manual tasks.

Traditional Pasted Cuffs

The Scan Rigger Gloves are finished with pasted cuffs.

These form part of the traditional rigger glove design and help complete the glove around the wrist.

The cuff design provides a practical finish for general-purpose workwear.

The cuffs are not intended to provide a liquid-tight seal or specialist protection against chemical exposure.

Ideal for General DIY Tasks

The Scan Rigger Gloves are designed for a wide range of everyday DIY activities.

Typical applications include:

• Home improvement projects

• General building work

• Handling timber

• Moving suitable construction materials

• Workshop maintenance

• General gardening tasks

• Handling tools and equipment

• Garage work

• Routine property maintenance

• General manual handling

The gloves should always be selected according to the hazards of the task.

For work involving significant cutting hazards, chemicals, extreme temperatures or electricity, use specialist gloves certified for the relevant protection requirements.

EN388 Mechanical Protection Rating

The Scan Rigger Gloves have a stated EN388 mechanical protection rating of 2-2-2-2.

This rating indicates tested performance across four mechanical protection categories.

Abrasion Resistance – Level 2

The gloves achieve a stated Level 2 abrasion resistance rating.

This indicates a tested degree of resistance to surface wear during contact with abrasive materials.

Blade Cut Resistance – Level 2

The gloves have a stated Level 2 blade cut resistance rating under the supplied four-digit classification.

This provides a defined level of protection under the relevant test conditions but does not make the gloves suitable for high-risk blade handling.

Tear Resistance – Level 2

The gloves achieve a stated Level 2 tear resistance rating.

This indicates resistance to tearing under the applicable mechanical test.

Puncture Resistance – Level 2

The gloves have a stated Level 2 puncture resistance rating.

This provides a defined level of resistance under the relevant puncture test but does not establish protection against needles or other specialised puncture hazards.

Important: The 2-2-2-2 rating reflects the supplied four-digit EN388 classification. Later versions of EN388 include additional cut-testing information and optional impact protection marking. Check the current product label and declaration of conformity before selecting the gloves for a particular workplace hazard.

EN420 General Protective Glove Standard

The Scan Rigger Gloves are also specified as conforming to EN420.

EN420 was the European standard covering general requirements for protective gloves.

It has since been superseded by EN ISO 21420.

The supplied EN420 conformity does not automatically establish certification to the newer standard.

Where current PPE compliance is required, confirm the applicable standards using the manufacturer's product documentation.

Practical for Building & Construction

The Scan Cow Split Leather Rigger Gloves are useful for suitable general-purpose tasks in building and construction environments.

The combination of a leather palm, reinforced fingers and knuckle strap provides a practical design for everyday handling activities.

Typical uses include:

• Carrying timber

• Handling suitable building materials

• Moving tools and equipment

• General site maintenance

• Workshop tasks

• Routine construction handling

For higher-risk tasks, select gloves with the specific protection levels required by the workplace risk assessment.

Glove Care & Maintenance

To help maintain the condition of the Scan Rigger Gloves:

1. Inspect the gloves before each use.

2. Check the leather palm for excessive wear, holes or damage.

3. Examine the reinforced finger sections and knuckle strap.

4. Inspect stitching and cuffs for deterioration.

5. Remove loose dirt after use.

6. Allow damp gloves to dry naturally, away from direct heat.

7. Follow the manufacturer's cleaning and storage instructions.

8. Replace the gloves when damaged or no longer fit for use.

Important: Do not use damaged gloves or assume that general-purpose rigger gloves provide protection against every workplace hazard.

Why Choose Scan Rigger Gloves?

The Scan Rigger Gloves offer a traditional, hardwearing design suitable for general-purpose DIY and manual handling.

Their cow split leather construction provides a practical protective surface, while the patched palm offers reinforcement in a frequently used area.

The striped cotton back, reinforced fingers, knuckle strap and pasted cuffs combine to create a versatile work glove for everyday use.

With a stated EN388 2-2-2-2 mechanical protection rating, these gloves offer defined levels of abrasion, blade cut, tear and puncture resistance for appropriately selected tasks.

Product Information

Brand: Scan
Product: Rigger Gloves
Type: General-Purpose Protective Work Gloves
Primary Material: Cow Split Leather
Back Material: Striped Cotton Fabric
Palm: Patched Leather Palm
Finger Protection: Reinforced Finger Sections
Knuckle Protection: Reinforced Knuckle Strap
Cuff Type: Pasted Cuffs
Primary Use: General DIY and Manual Handling
Stated Standards: EN420 and EN388
EN388 Rating: 2-2-2-2
Abrasion Resistance: Level 2
Blade Cut Resistance: Level 2
Tear Resistance: Level 2
Puncture Resistance: Level 2
Suitable Applications: DIY, Construction, Workshop, Maintenance and General Handling
Available Sizes: Not Specified

Please note: Exact glove sizes, colour variations and certification to current standards have not been supplied. Confirm the selected variant and suitability for the intended task before purchasing.

Data Sheets:
Data Sheet
Data Sheet
Data Sheet

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns

• 3 Stars

  3/5

  Written by: Mr Lalor

  Date: 06/02/2021