The Scan Heavy-Duty Rigger Gloves are superior-quality leather work gloves designed for demanding handling tasks in construction, engineering, agriculture, warehousing and general industrial environments.

Manufactured from tough cow split leather, these heavy-duty safety gloves feature a double-stitched green split leather reinforced palm, thumb and fully wrapped index finger for enhanced durability in high-wear areas.

The gloves also incorporate reinforced fingertips, a protective knuckle strap and a distinctive red fabric back with elasticated braid, combining robust construction with practical comfort.

A 7cm rubberised cuff provides additional wrist-area coverage and helps maintain the traditional rigger glove design.

Specified as conforming to EN420 and EN388, the gloves have a mechanical protection rating of 3-2-4-4, including the highest rating on the supplied scales for both tear resistance and puncture resistance.

Whether you're handling rough building materials, carrying out site maintenance or working with general industrial equipment, the Scan Heavy-Duty Leather Rigger Gloves offer a practical combination of strength, reinforcement and mechanical hand protection.

Key Benefits

• Superior-quality Scan heavy-duty rigger gloves

• Durable cow split leather construction

• Double-stitched reinforced palm

• Green split leather reinforcement

• Reinforced thumb for improved durability

• Fully wrapped index finger

• Reinforced fingertips

• Protective knuckle strap

• Red fabric back

• Elasticated braid for improved fit

• 7cm rubberised cuffs

• Suitable for demanding general handling tasks

• Stated conformity to EN420 and EN388

• Mechanical protection rating of 3-2-4-4

• Level 3 abrasion resistance

• Level 2 blade cut resistance

• Level 4 tear resistance

• Level 4 puncture resistance

Heavy-Duty Cow Split Leather Construction

The Scan Heavy-Duty Rigger Gloves are manufactured using robust cow split leather.

Cow split leather is widely used in industrial handling gloves because of its durability and suitability for work involving rough materials.

The tough leather construction makes these gloves a practical choice for tasks where ordinary lightweight gloves may wear quickly.

Their traditional rigger design is particularly suited to appropriately assessed manual handling applications.

Double-Stitched Reinforced Palm

A standout feature of these gloves is the double-stitched green split leather reinforced palm.

The palm is one of the highest-wear areas of a work glove, particularly during lifting, carrying and gripping tasks.

The additional leather reinforcement helps improve durability in this frequently used area.

Double stitching provides further reinforcement to the construction, helping the gloves withstand regular manual handling.

This makes the Scan Heavy-Duty Rigger Gloves particularly useful when working with rough or abrasive materials.

Reinforced Thumb & Fully Wrapped Index Finger

The gloves feature additional reinforcement around the thumb and index finger.

The thumb is reinforced with green split leather, while the index finger is fully wrapped for increased coverage.

These areas are frequently exposed to friction when gripping tools, carrying materials or handling equipment.

The reinforced construction helps protect these high-contact areas against everyday wear.

Reinforced Fingertips

The Scan Heavy-Duty Leather Gloves incorporate reinforced fingertips.

Fingertips are particularly vulnerable to wear during repetitive handling and gripping tasks.

The additional reinforcement helps improve durability where frequent contact with materials occurs.

This feature is useful for construction, maintenance and general industrial handling applications.

Protective Knuckle Strap

The gloves include a reinforced knuckle strap.

This provides an additional protective layer across the back of the knuckle area.

The knuckle strap is a traditional feature of rigger gloves and contributes to their robust construction.

Important: The presence of a knuckle strap does not establish certified impact protection. No separate impact protection rating has been supplied.

Red Fabric Back with Elasticated Braid

The gloves feature a distinctive red fabric back with elasticated braid.

The fabric back provides a more flexible construction than an entirely leather glove, helping support normal hand movement during handling tasks.

The elasticated braid helps the gloves fit securely around the hand.

This combination offers a practical balance between reinforced leather protection and everyday wearing comfort.

7cm Rubberised Cuffs

The Scan Heavy-Duty Rigger Gloves incorporate 7cm rubberised cuffs.

These provide additional coverage around the wrist area and contribute to the traditional heavy-duty rigger glove design.

The cuffs help maintain the glove's shape and provide a convenient opening for putting the gloves on and taking them off.

Important: The rubberised cuffs do not make the gloves waterproof, chemical-resistant or suitable for immersion in liquids.

EN388 Mechanical Protection Rating – 3-2-4-4

The Scan Heavy-Duty Rigger Gloves have a stated EN388 mechanical protection rating of 3244.

This four-digit rating identifies performance under the traditional EN388 test format.

Abrasion Resistance – Level 3

The gloves achieve a stated Level 3 abrasion resistance rating.

This indicates a substantial level of resistance to surface wear under the applicable test conditions.

It is useful for tasks involving repeated contact with rough materials.

Blade Cut Resistance – Level 2

The gloves have a stated Level 2 blade cut resistance rating.

This provides a defined level of cut resistance under the traditional EN388 blade cut test.

However, these gloves should not be assumed suitable for significant blade hazards or specialist sharp-edge handling.

Tear Resistance – Level 4

The gloves achieve Level 4 tear resistance, the highest performance level on the supplied four-level scale.

This makes them particularly relevant to demanding handling tasks where glove materials may be subjected to pulling and tearing forces.

Puncture Resistance – Level 4

The gloves also achieve Level 4 puncture resistance, the highest rating on the supplied four-level scale.

This indicates strong resistance to the specified puncture test under controlled conditions.

Important: EN388 puncture testing does not establish protection against hypodermic needles or every sharp object. The gloves are not puncture-proof.

Stated Conformity to EN420 & EN388

The Scan Heavy-Duty Rigger Gloves are specified as conforming to:

• EN420: General requirements for protective gloves.

• EN388: Protective gloves against mechanical risks.

EN420 has been superseded by EN ISO 21420, and EN388 has been updated over time.

The supplied 3244 rating follows the traditional four-digit EN388 marking format.

The exact edition of EN388 and any additional markings required under newer editions have not been supplied.

For workplace PPE selection, check the manufacturer's current product label and declaration of conformity.

Ideal for Construction & Industrial Handling

The Scan Heavy-Duty Rigger Gloves are designed for appropriately assessed manual handling tasks where durability and mechanical protection are important.

Typical applications include:

• Construction site work

• Handling building materials

• General engineering tasks

• Agricultural maintenance

• Warehousing and logistics

• Industrial material handling

• General workshop maintenance

• Loading and unloading

• Outdoor maintenance

• Handling rough timber and similar materials

The reinforced palm, thumb and index finger make these gloves particularly useful for repetitive gripping and carrying tasks.

Always assess the specific hazards before selecting protective gloves.

Comfort & Practical Fit

Despite their heavy-duty construction, the gloves incorporate several features intended to improve everyday comfort.

The fabric back provides flexibility, while the elasticated braid helps maintain a secure fit.

The 7cm rubberised cuffs provide additional wrist coverage, and the reinforced leather areas are positioned where durability is especially important.

Selecting the correct glove size helps maintain safe grip, comfort and hand movement.

Care & Maintenance

To help maintain the condition of the Scan Heavy-Duty Rigger Gloves:

1. Inspect the gloves before each use.

2. Check the leather for tears, holes and excessive wear.

3. Examine the double-stitched palm reinforcement.

4. Inspect the thumb, index finger and reinforced fingertips.

5. Check the knuckle strap and cuffs for damage.

6. Remove loose dirt using a suitable method.

7. Avoid soaking the gloves unless permitted by the manufacturer.

8. Allow damp gloves to dry naturally, away from direct heat.

9. Replace gloves that are damaged or heavily contaminated.

Important: These gloves are not stated to provide chemical, electrical, thermal or liquid protection. Use specialist gloves where those hazards are present.

Why Choose Scan Heavy-Duty Rigger Gloves?

The Scan Heavy-Duty Rigger Gloves combine tough cow split leather construction with additional reinforcement in the areas most exposed to wear.

Their double-stitched green leather palm, reinforced thumb, fully wrapped index finger and strengthened fingertips provide a durable design for demanding handling applications.

The red fabric back, elasticated braid and 7cm rubberised cuffs help provide a practical and comfortable fit.

With a stated EN388 3244 mechanical protection rating, including Level 4 tear resistance and Level 4 puncture resistance, these gloves offer robust protection for appropriately assessed construction, engineering and industrial handling tasks.

For users looking for heavy-duty leather rigger gloves with reinforced palms and high mechanical protection ratings, the Scan Heavy-Duty Rigger Gloves are a dependable choice for everyday work.

Product Information

Brand: Scan
Product: Heavy-Duty Rigger Gloves
Type: Heavy-Duty Leather Protective Work Gloves
Main Material: Cow Split Leather
Palm: Double-Stitched Green Split Leather Reinforcement
Thumb: Reinforced Split Leather
Index Finger: Fully Wrapped and Reinforced
Fingertips: Reinforced
Knuckle Protection: Reinforced Knuckle Strap
Back Material: Red Fabric
Fit Feature: Elasticated Braid
Cuff Type: Rubberised
Cuff Length: 7cm
Stated Standards: EN420 and EN388
Mechanical Protection Rating: 3-2-4-4
Abrasion Resistance: Level 3/4
Blade Cut Resistance: Level 2/5
Tear Resistance: Level 4/4
Puncture Resistance: Level 4/4
Suitable Applications: Construction, Engineering, Agriculture, Warehousing and General Industrial Handling
Available Sizes: Not Specified

Please note: The exact glove sizes and editions of the stated safety standards have not been supplied. EN388 ratings are based on standardised tests and do not guarantee protection against every workplace hazard.

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns

• Grand job for heavy duty brambles

  5/5

  Written by: Mr Grainger

  Date: 05/05/2020