J-B Weld SteelStik™ Epoxy Putty 57g – Steel Reinforced Metal Repair

J-B Weld SteelStik™ Epoxy Putty 57g is a hand-mixable, steel-reinforced epoxy putty designed for fast repairs, patching and rebuilding of steel and other suitable metal components. Its mouldable consistency makes it ideal for filling damaged areas, rebuilding missing sections and creating strong repairs where a conventional liquid adhesive may be difficult to use.

Once mixed, SteelStik™ forms an industrial-strength polymer compound that can be shaped and moulded before setting. This makes it particularly useful for repairing cracks, holes, rust-damaged areas and other defects in suitable metal components.

J-B Weld SteelStik™ can be applied to both wet and dry surfaces, providing additional versatility for workshop, maintenance, automotive and general metal repair applications.

Once cured, the steel-reinforced compound is resistant to water, chemicals and heat and will not rust. It is particularly useful for automotive repairs, suitable vehicle exhaust repairs and repairing rust-damaged metal components.

SteelStik™ has a fast 5-minute set time and reaches full cure in approximately 1 hour, making it an excellent choice when a quick metal repair is required. Once dry, it forms a durable dark grey finish.

For anyone looking for a steel repair putty, metal epoxy filler, mouldable metal repair compound or fast-setting epoxy putty for automotive repairs, J-B Weld SteelStik™ provides a convenient and versatile solution.

Key Benefits

• Hand-mixable epoxy putty for metal repairs

• Steel-reinforced formulation

• Non-rusting repair compound

• Designed for repairing and rebuilding steel components

• Industrial-strength polymer compound

• Can be moulded and shaped before setting

• Ideal for patching damaged metal

• Suitable for building up missing or damaged areas

• Can be applied to wet surfaces

• Suitable for dry surfaces

• Resistant to water once cured

• Chemical resistant

• Heat resistant

• Ideal for automotive repairs

• Suitable for appropriate vehicle exhaust repairs

• Useful for repairing rust-damaged metal

• Fast 5-minute set time

• Fully cures in approximately 1 hour

• 900 PSI bonding strength

• Cures to a dark grey finish

• Convenient 57g size

How to Use

• Ensure the repair area is suitably prepared by removing loose rust, paint, dirt, grease and unstable material where possible.

• For best adhesion, provide a clean and sound surface for the putty to bond to.

• SteelStik™ can be used on suitable wet or dry surfaces.

• Cut or remove the required amount of epoxy putty.

• Knead and mix the SteelStik™ thoroughly by hand according to the manufacturer's instructions until a consistent mixture is achieved.

• Press the mixed putty firmly into the crack, hole or damaged area.

• For rebuilding applications, mould and shape the compound to recreate the required section.

• Complete positioning and shaping promptly due to the fast setting time.

• Allow approximately 5 minutes for the putty to set.

• Allow approximately 1 hour for full cure before placing the repaired component into normal service.

• Always follow the manufacturer's application and safety instructions supplied with the product.

Typical Applications

• Steel repairs

• Metal repairs

• Cracked metal components

• Holes in suitable metal parts

• Rust-damaged areas

• Automotive repairs

• Suitable vehicle exhaust repairs

• Metal patching

• Rebuilding damaged steel components

• Workshop repairs

• Maintenance work

• DIY metal repairs

• Wet-surface metal repairs

• Filling and rebuilding metal components

Product Information

Brand: J-B Weld
Product: SteelStik™ Epoxy Putty
Size: 57g
Type: Steel-reinforced, hand-mixable epoxy putty
Bonding Strength: 900 PSI
Set Time: Approximately 5 minutes
Cure Time: Approximately 1 hour
Colour When Dry: Dark Grey
Wet Surface Application: Yes
Dry Surface Application: Yes
Water Resistant: Yes
Chemical Resistant: Yes
Heat Resistant: Yes
Non-Rusting: Yes
Primary Use: Repairing, patching & rebuilding steel and suitable metal components

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns