The Scan Industrial Safety Helmet is a lightweight, durable protective hard hat designed to provide essential head protection for construction workers, site personnel, tradespeople and industrial workers.

Manufactured from high-density polyethylene (HDPE), this industrial safety helmet is designed to protect the head against suitable workplace hazards, including falling objects and accidental contact with fixed obstacles.

Weighing just 340g, the helmet combines a robust protective shell with a lightweight construction for comfortable everyday wear.

An integrated rain gutter helps channel rainwater away from the helmet and face, making it a practical choice for outdoor construction and maintenance work.

The helmet features an adjustable head fitting system, accommodating head circumferences from 530mm to 630mm (53–63cm).

Specified as conforming to EN397:1995+A1:2000, the Scan Industrial Safety Helmet provides a practical head protection solution for appropriately assessed construction and industrial environments.

Key Benefits

• Scan industrial safety helmet

• Manufactured from high-density polyethylene (HDPE)

• Designed for protection against falling objects

• Helps protect against accidental contact with fixed obstacles

• Lightweight construction weighing just 340g

• Adjustable head fitting system

• Fits head circumferences from 530mm to 630mm

• Integrated rain gutter

• Rain gutter channels water away from the helmet and face

• Suitable for construction and industrial environments

• Practical for outdoor site work

• Stated conformity to EN397:1995+A1:2000

• Designed for everyday workplace head protection

High-Density Polyethylene (HDPE) Construction

The Scan Industrial Safety Helmet is manufactured from high-density polyethylene, commonly known as HDPE.

HDPE is widely used in industrial safety helmets because it offers a practical combination of strength, durability and low weight.

The helmet's protective shell is designed to help absorb and distribute impact forces under the conditions covered by its applicable safety standard.

This makes it suitable for appropriately assessed work environments where head protection is required.

Benefits of HDPE Construction

• Durable protective shell

• Lightweight material

• Practical for regular workplace use

• Suitable for industrial helmet applications

• Designed to withstand relevant standardised impact tests

Important: No safety helmet can protect against every impact. The helmet must be correctly fitted, maintained and used within the limits of its certification.

Protection Against Falling Objects

Head protection is an essential part of workplace safety on construction sites and in industrial environments.

The Scan HDPE Safety Helmet is designed to help protect against injuries caused by falling objects.

Potential hazards include:

• Falling tools

• Dropped materials

• Objects dislodged during construction work

• Accidental impacts in industrial environments

The helmet also provides protection against certain impacts with fixed obstacles, such as beams, structures and overhead equipment.

Its suitability must always be determined by the hazards identified in the workplace risk assessment.

Lightweight 340g Design

Weighing approximately 340g, the Scan Industrial Safety Helmet offers a lightweight option for workers who need to wear head protection throughout the working day.

A lighter helmet can help reduce the burden associated with prolonged wear.

This makes it practical for:

• Construction site personnel

• Builders and tradespeople

• Maintenance engineers

• Warehouse and industrial workers

• Site supervisors

• Outdoor maintenance teams

Comfort also depends on correct adjustment and compatibility with any other required protective equipment.

Adjustable Head Size – 530mm to 630mm

The Scan Adjustable Safety Helmet features a head fitting system designed to accommodate circumferences from 530mm to 630mm.

This is equivalent to approximately 53cm to 63cm.

The adjustable fit allows users to position the helmet securely and comfortably.

Why Correct Helmet Fit Matters

A properly adjusted safety helmet helps:

• Keep the helmet correctly positioned

• Reduce unwanted movement

• Improve comfort during use

• Maintain the intended protective positioning of the shell

The helmet should sit securely without excessive tightness.

Always follow the manufacturer's instructions when adjusting the fitting system.

Integrated Rain Gutter

A practical feature of the Scan Industrial Hard Hat is its integrated rain gutter.

The gutter is designed to channel rainwater away from the helmet and face.

This can be particularly useful for workers carrying out tasks outdoors in wet weather.

Benefits of the Rain Gutter

• Helps divert rainwater away from the face

• Practical for outdoor construction work

• Useful during wet weather

• Supports comfort in changing working conditions

The rain gutter does not make the wearer fully weatherproof, but it provides a useful feature for everyday site work.

Suitable for Construction & Industrial Work

The Scan Industrial Safety Helmet is designed for a range of workplaces where protective headwear is required.

Potential applications include:

• Building and construction sites

• General contracting

• Property maintenance

• Industrial facilities

• Warehouses with overhead impact hazards

• Civil engineering projects

• Outdoor site inspections

• Site supervision

• General trade work

• Maintenance and repair activities

The appropriate helmet type should always be selected according to the workplace risk assessment.

Important: No additional certifications for electrical insulation, molten metal protection or extreme-temperature performance have been supplied.

EN397 Industrial Safety Helmet Standard

The Scan Industrial Safety Helmet is specified as conforming to EN397:1995+A1:2000.

EN397 is the European standard covering industrial safety helmets.

It includes requirements and test methods relating to essential protective performance, including:

• Shock absorption

• Resistance to penetration

• Retention system performance

• Relevant construction and design requirements

• Product markings and information

The supplied specification refers to an older edition of EN397. For current workplace compliance, check the manufacturer's latest declaration of conformity and product markings.

Important: EN397 conformity does not automatically establish protection against every possible head hazard. Optional performance claims, such as electrical insulation or molten metal resistance, require separate confirmation.

How to Fit the Scan Industrial Safety Helmet

Correct fitting is essential for effective head protection.

1. Inspect the helmet shell and internal fitting system before use.

2. Check for cracks, deformation or other visible damage.

3. Place the helmet on your head in the intended orientation.

4. Adjust the fitting system to suit your head circumference.

5. Ensure the helmet sits securely and comfortably.

6. Check that it does not move excessively during normal head movement.

7. Follow the manufacturer's instructions for any compatible accessories.

Do not modify the helmet or drill holes in the shell.

Only use accessories approved as compatible with the specific helmet model.

Helmet Inspection & Maintenance

To help maintain the condition of the Scan Safety Helmet:

• Inspect the shell and fittings before each use.

• Check for cracks, dents, deformation or deterioration.

• Keep the helmet clean according to the manufacturer's instructions.

• Avoid exposure to chemicals that may damage HDPE.

• Store away from excessive heat and direct sunlight when not in use.

• Do not paint or apply adhesives unless approved by the manufacturer.

• Replace the helmet following a significant impact, even if no damage is visible.

• Follow the manufacturer's service-life and replacement guidance.

The helmet's usable life depends on its condition, storage, exposure and the manufacturer's instructions.

Why Choose Scan Industrial Safety Helmet?

The Scan Industrial Safety Helmet combines durable HDPE construction, a lightweight design and practical features for everyday site work.

Its 340g weight makes it comfortable to wear, while the adjustable 530–630mm fitting system allows the helmet to accommodate a range of head sizes.

The integrated rain gutter adds convenience for outdoor work by helping divert water away from the face.

With stated conformity to EN397:1995+A1:2000, this helmet provides a practical option for construction workers, tradespeople and industrial personnel requiring suitable protective headwear.

For anyone looking for a lightweight, adjustable HDPE construction safety helmet, the Scan Industrial Safety Helmet offers a straightforward solution for everyday workplace head protection.

Product Information

Brand: Scan
Product: Industrial Safety Helmet
Type: Industrial Protective Safety Helmet / Hard Hat
Shell Material: High-Density Polyethylene (HDPE)
Primary Protection: Falling Objects and Suitable Impact Hazards
Head Size Range: 530–630mm
Head Size Range in Centimetres: 53–63cm
Head Fitting: Adjustable
Helmet Weight: 340g
Rain Gutter: Yes
Rain Gutter Function: Channels Water Away from the Helmet and Face
Stated Standard: EN397:1995+A1:2000
Suitable Applications: Construction, Industrial Work, Site Maintenance and General Trade Work
Helmet Colour: Not Specified
Chin Strap: Not Specified
Electrical Insulation Rating: Not Specified
Additional Optional EN397 Ratings: Not Specified

Please note: The supplied conformity reference is to EN397:1995+A1:2000. Check the manufacturer's current documentation and product markings to confirm suitability for the intended workplace and any additional protection requirements.

Data Sheet

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns