The Scan Premier FFP3 Valved Disposable Dust Masks are high-filtration particulate respirators designed to provide respiratory protection against suitable hazardous airborne dusts, fine particles, fibres and particulate fumes.

Featuring an integrated exhalation valve, a full PVC face seal and an adjustable nose clip, these premium disposable respirators are designed to combine high levels of particulate filtration with a comfortable, secure fit.

The masks have also passed the optional Dolomite clogging test, demonstrating resistance to clogging under specified test conditions and helping maintain more manageable breathing resistance during dusty work.

Manufactured from the filtering material itself, the Scan Premier FFP3 Masks cover the nose, mouth and chin and feature elasticated retaining straps and a non-irritating inner facepiece for additional comfort.

Specified as conforming to EN149:2001+A1:2009, these masks provide FFP3 particulate respiratory protection, the highest filtering facepiece class under the standard.

They may be suitable for appropriately assessed tasks involving woodworking dust, masonry dust, silica-containing materials, mineral fibres and certain metalworking fumes, provided the required protection factor and all other workplace safety conditions are met.

Important: FFP3 masks protect against suitable airborne particles, not gases or vapours. They must not be relied upon for paint solvent vapours, carbon monoxide, unknown toxic atmospheres or oxygen-deficient environments.

Key Benefits

• Scan Premier FFP3 valved disposable respirators

• Highest EN149 filtering facepiece protection class

• Minimum 99% filtration efficiency under standardised test conditions

• Stated conformity to EN149:2001+A1:2009

• Passed the optional Dolomite clogging test

• Integrated exhalation valve for easier breathing out

• Full PVC face seal for improved facial contact

• Adjustable nose clip for a customised fit

• Elasticated retaining straps

• Non-irritating inner facepiece

• Designed to cover the nose, mouth and chin

• Suitable for appropriately assessed fine dust and particulate fume hazards

• Potential applications in woodworking, masonry and metalworking

• Disposable after each work period or eight-hour shift, subject to condition and manufacturer instructions

FFP3 High-Filtration Respiratory Protection

The Scan Premier FFP3 Masks are classified as FFP3 filtering facepiece respirators.

FFP3 is the highest particulate filtration class under EN149.

Under standardised laboratory testing, FFP3 respirators must achieve a minimum 99% filtration efficiency against the specified test aerosols.

This makes them a potential choice for work involving more hazardous particulate exposures, where a risk assessment confirms that a properly fitted FFP3 respirator provides sufficient protection.

In UK workplace respiratory protection guidance, correctly selected and fitted FFP3 respirators are generally associated with an assigned protection factor (APF) of 20.

The actual level of protection depends on:

• Correct respirator selection

• An effective facial seal

• Appropriate face-fit testing

• Proper fitting and use

• The concentration and nature of airborne contaminants

• Suitable workplace dust-control measures

Important: The 99% filtration rating is a laboratory filter-performance requirement, not a guarantee of 99% exposure reduction for every wearer.

Dolomite Clogging Test – Improved Resistance to Dust Loading

A key feature of the Scan Premier FFP3 Valved Respirators is that they have passed the optional Dolomite clogging test.

This test evaluates how the respirator performs when exposed to a specified dust-loading challenge.

Passing the test demonstrates that the mask meets additional requirements relating to resistance to clogging and breathing resistance.

This can be particularly beneficial in dusty working environments where filter loading may otherwise make breathing more difficult.

Benefits of Dolomite-Tested Respirators

• Demonstrated resistance to clogging under test conditions

• Helps maintain manageable breathing resistance during dust exposure

• Practical for suitably assessed dusty work

• Complements the respirator's FFP3 filtration classification

Important: Passing the Dolomite test does not make the mask reusable or guarantee a fixed service life. Replace the respirator whenever it becomes damaged, contaminated, difficult to breathe through or unsuitable for continued use.

Integrated Exhalation Valve

The Scan Premier FFP3 Masks incorporate an exhalation valve designed to make breathing out easier.

The valve allows warm, moist exhaled air to escape more readily, reducing resistance during exhalation.

This can improve comfort during physically demanding activities.

Exhalation Valve Benefits

• Helps reduce exhalation resistance

• Allows warm air to escape

• Helps reduce moisture build-up inside the facepiece

• Improves comfort during suitable work tasks

Important: The valve does not filter outgoing breath. These masks should not be used where filtration of the wearer's exhaled air is required.

Full PVC Face Seal

The Scan Premier FFP3 Respirators feature a full PVC face seal designed to improve contact between the mask and the wearer's face.

The seal helps the respirator sit securely around the nose and mouth when correctly fitted.

An effective seal is essential because unfiltered air can enter through gaps around the facepiece.

The PVC seal works alongside the adjustable nose clip and retaining straps to support a customised fit.

However, no respirator fits every facial shape, and the presence of a full face seal does not eliminate the need for appropriate fit testing.

Adjustable Nose Clip

The masks feature an adjustable nose clip that allows the upper section of the respirator to be shaped around the bridge of the nose.

Correct adjustment helps reduce gaps that could allow contaminated air to bypass the filter.

Always follow the manufacturer's fitting instructions.

Elasticated Retaining Straps

The Scan Premier FFP3 Disposable Masks incorporate elasticated retaining straps designed to keep the respirator securely positioned.

Correct strap placement is important for maintaining the facial seal.

Do not modify the straps or wear them in a way that compromises the fit.

Non-Irritating Inner Facepiece

The masks include a non-irritating inner facepiece designed to improve comfort during use.

Combined with the PVC face seal, adjustable nose clip and exhalation valve, this helps make the respirators practical for appropriately assessed tasks requiring high-filtration disposable respiratory protection.

If the respirator causes irritation or cannot be fitted securely, select a suitable alternative.

Suitable for Woodworking & MDF Dust

The Scan Premier FFP3 Valved Dust Masks may be suitable for appropriately assessed woodworking activities involving airborne dust.

Potential applications include:

• Hand sanding of softwood

• Hand sanding of hardwood

• Power sanding with suitable dust extraction

• MDF machining and sanding

• General woodworking maintenance

• Workshop dust-generating tasks

Wood dust can cause respiratory irritation, asthma and other serious health problems.

Hardwood dust is also associated with an increased risk of certain cancers.

Use suitable extraction and dust-control measures alongside correctly selected respiratory protection.

Masonry, Concrete & Silica Dust

The supplied product information identifies applications involving:

• Masonry dust

• Concrete dust

• Brick dust

• Silica-containing materials

• Construction maintenance

Cutting, grinding or drilling concrete, stone and masonry can generate respirable crystalline silica.

Inhaling respirable crystalline silica can cause serious lung disease, including silicosis.

FFP3 respiratory protection may be appropriate for certain silica-related tasks, but only where a suitable exposure assessment confirms that its protection factor is adequate.

Important: Use effective on-tool extraction, wet methods or other suitable engineering controls. FFP3 respiratory protection should not be treated as a substitute for controlling dust at its source.

Metalworking & Welding Particulates

The Scan Premier FFP3 Masks may be considered for certain metalworking tasks involving airborne particulate hazards.

Potential applications include:

• Suitable grinding operations

• Selected metalworking tasks

• Certain particulate fumes from metalworking

• Appropriately assessed welding particulate exposures

Welding fumes can contain hazardous metal particles, but welding also presents other hazards, including gases and potentially high exposure concentrations.

Important: An FFP3 filtering facepiece does not protect against welding gases or vapours. Welding tasks may require local exhaust ventilation, specialist respiratory protection or air-supplied equipment. Confirm suitability through a task-specific risk assessment.

Mineral Fibres, Fibreglass & Loft Insulation

These masks may also be suitable for certain activities involving:

• Fibreglass insulation

• Mineral wool

• Loft insulation

• Other appropriately assessed airborne fibre hazards

The correct respiratory protection depends on the material being handled, the airborne exposure level and the nature of the work.

Important: Do not assume these masks are suitable for asbestos removal or unidentified insulation materials. Suspected asbestos requires specialist assessment and appropriate controls.

Toxic Waste, Smoke & Paint Fumes – Important Limitations

The supplied application list includes toxic waste disposal, smoke fumes, paint fumes and varnish fumes.

These activities can involve mixtures of particles, gases and vapours.

An FFP3 particulate respirator is not a universal solution for these hazards.

• Toxic waste: May release unknown or highly hazardous substances requiring specialist respiratory protection.

• Smoke: May contain fine particles alongside toxic gases such as carbon monoxide.

• Paint and varnish: Solvent-based products can release vapours that pass through particulate filters.

• Spraying: May generate both liquid droplets and hazardous vapours.

Do not use these masks for unknown atmospheres, firefighting, confined spaces with atmospheric hazards or oxygen-deficient environments.

Select respiratory protection based on the specific contaminants and exposure assessment.

Understanding FFP1, FFP2 & FFP3

EN149 defines three filtering facepiece respirator classes.

The filtration efficiencies are measured under standardised laboratory conditions.

Assigned protection factors depend on correct selection, fit and use.

FFP1 – Basic Particulate Protection

FFP1 respirators offer the lowest EN149 filtering facepiece protection class and may be suitable for certain low-level particulate exposures.

FFP2 – Higher Particulate Protection

FFP2 respirators provide increased tested filtration performance and may be appropriate for certain fine dust and particulate hazards.

FFP3 – Highest Filtering Facepiece Protection Class

FFP3 respirators provide the highest tested filtration performance under EN149 and are often selected for more hazardous particulate exposures.

Important: FFP1, FFP2 and FFP3 are not defined by fixed particle-size bands. Claims that FFP3 only protects against particles smaller than 2 microns are incorrect. The classification is based on specified filtration, leakage and performance tests.

EN149:2001+A1:2009 Standard

The Scan Premier FFP3 Valved Disposable Masks are specified as conforming to EN149:2001+A1:2009.

EN149 covers filtering half masks designed to protect against airborne particles.

The standard includes requirements relating to:

• Filtration performance

• Breathing resistance

• Inward leakage

• Practical performance

• Product markings

• Additional clogging testing, where applicable

The supplied information confirms that these masks have passed the optional Dolomite clogging test.

Check the current product markings and manufacturer's declaration of conformity to confirm the complete designation, including any NR, R and D markings.

How to Fit Scan Premier FFP3 Masks

Correct fitting is essential to achieving the intended level of protection.

1. Inspect the respirator, valve and face seal for damage.

2. Position the mask over the nose, mouth and chin.

3. Secure the elasticated retaining straps according to the manufacturer's instructions.

4. Adjust the nose clip to follow the shape of the nose.

5. Ensure the full PVC face seal sits correctly against the skin.

6. Perform the manufacturer's recommended user seal check.

7. Reposition or replace the mask if an effective seal cannot be achieved.

For workplace use, tight-fitting respiratory protective equipment generally requires a suitable face-fit test for the individual wearer.

Important: Facial hair in the sealing area can prevent an effective seal and reduce respiratory protection.

Disposable & Single-Shift Use

The supplied instructions state that the masks should be disposed of after each work period or an eight-hour shift.

Replace the respirator sooner if it becomes:

• Damaged

• Contaminated

• Wet or heavily soiled

• Difficult to breathe through

• Unable to maintain a secure facial seal

• Affected by a damaged or malfunctioning exhalation valve

Passing the Dolomite clogging test does not guarantee that a mask will remain suitable for an entire eight-hour shift.

Follow the manufacturer's instructions and applicable workplace respiratory protection procedures.

Why Choose Scan Premier FFP3 Valved Disposable Masks?

The Scan Premier FFP3 Valved Disposable Masks combine high-filtration particulate protection with comfort-focused design features.

Their FFP3 classification provides the highest tested filtering facepiece performance under EN149, while the Dolomite clogging test demonstrates additional resistance to dust loading.

The integrated exhalation valve helps make breathing out easier, and the full PVC face seal, adjustable nose clip and elasticated retaining straps support a secure, customised fit.

With stated conformity to EN149:2001+A1:2009, these respirators offer a practical option for appropriately assessed tasks involving hazardous airborne dust and particulate fumes.

For users seeking FFP3 disposable respirators with an exhalation valve, full face seal and Dolomite-tested performance, the Scan Premier FFP3 Masks provide a high-filtration respiratory protection solution when correctly selected and fitted.

Product Information

Brand: Scan
Product: Premier FFP3 Valved Disposable Masks
Type: Disposable Particulate Filtering Facepiece Respirator
Protection Class: FFP3
Stated Standard: EN149:2001+A1:2009
Minimum Tested Filter Efficiency: 99%
Typical UK Assigned Protection Factor: 20
Design: Filtering Facepiece
Construction: Filtering Material Forms the Mask Body
Exhalation Valve: Yes
Valve Function: Helps Reduce Exhalation Resistance
Dolomite Clogging Test: Passed
Face Seal: Full PVC Face Seal
Face Coverage: Nose, Mouth and Chin
Retaining Straps: Elasticated
Nose Adjustment: Adjustable Nose Clip
Inner Facepiece: Non-Irritating
Use Duration: Dispose of After Each Work Period or Eight-Hour Shift, Subject to Condition and Instructions
Potential Applications: Appropriately Assessed Woodworking, Masonry, Silica Dust, Mineral Fibre and Metalworking Particulate Tasks
Gas and Vapour Protection: No
Full NR/R/D Marking: Not Specified
Pack Quantity: Not Specified

Please note: The complete EN149 markings and pack quantity have not been supplied. These masks provide particulate protection only and must not be used as protection against solvent vapours, toxic gases, oxygen-deficient atmospheres or unknown airborne hazards. A suitable risk assessment and effective face fit are essential.

Data Sheets:
Data Sheet
Data Sheet
Data Sheet
Data Sheet
Data Sheet
Data Sheet
Data Sheet

WEEE Recycling Producer Registration Number:12889

How do I return my old product to be recycled?

You can return your old product to MyDIY. Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

What products can I recycle for free?

You can return anything that is electricaly powered or battery powered. Even your old bicycle lamps can be recycled!.

Do you take back used batteries?

Yes we do. The batteries that we accept are AA, AAA, C or D, powertool batterys and also the flat batteries that are found in watches and toys. Unfortunately we do not accept back any Industrial or car batteries.

Do I need to have made a purchase at MyDIY.ie?

No you don't. You can recycle any of the above items at our store in Inchicore Dublin 8, even if you have not made a purchase with us.

Will you collect my old product?

Yes, but we must be notafied within 14 days of purchase date. You can still arrange to have your old appliance recycled free of charge. Simply bring it back to our Inchicore store and we will ensure that it is disposed of in an environmentally friendly manner.

How much will it cost?

There is no charge to return products to any of our warehouses.

Why should I recycle with MyDIY?

We will ensure that your old product is disposed of correctly to reduce the potentially harmful effects caused on the environment and to conserve natural resources. Further information can be found on weeeireland.ie.

EMC (Environmental Management Cost) Included in the purchase price. 

Gas discharge lamps, LFLs and CFLs €0.15

LED lamps and luminaires €0.05

Large appliances €5.00

Information

Fast & Reliable Shipping with DPD

We ship all orders via DPD, one of Ireland’s most trusted couriers. With DPD’s one-hour delivery window, you won’t have to wait around all day for your MyDIY.ie order!

Delivery Times

Each product on our website is marked with an estimated delivery time. If you order multiple items, your order will arrive based on the item with the longest delivery time. For example, if you buy two next-day items and one 3-day item, the entire order will arrive in 3 days.

While most products arrive in 1-2 days, we offer over 44,000 items, so please allow 4-5 working days for some deliveries. Need it faster? Call us at 01-446692, and we'll do our best to help.

Delivery Charges

• FREE delivery for orders over €150 within Ireland.

• Orders under €150: €8.99 delivery fee.

• International delivery: Charges based on weight—contact us for a quote.

When Will I Receive My Order?

• Most orders ship on a 24-hour courier service (2 working days).

• Larger orders may take 4-5 days, and pallet deliveries require scheduling.

• Orders placed before 2 PM usually ship within 24 hours.

• Orders after 1:30 PM Friday or on weekends ship the following week.

• Busy holiday periods may cause slight delays beyond our control.

Do I Need to Be Home for Delivery?

Yes, someone must sign for deliveries due to item value. If you're not home, DPD will leave a card with re-delivery or collection instructions. After two failed attempts, your order may be returned to us, and a re-delivery fee may apply.

Damaged or Incomplete Orders

We carefully pack all orders, but if something arrives damaged or incomplete, contact us within 24 hours. Report shortages within 3 days of delivery.

International Shipping

We ship to Europe and worldwide, with charges based on weight. Liquid products cannot be shipped internationally due to regulations. Contact us for a quote—we're happy to help!

Customer Service & Returns